Measure Reference Manual

To save space in the configuration table, omit config^name from the
DEVICE^SVNET^DESC^G05 structure. You must set the descriptor length (len) to reflect
whether you are using config^name because Measure uses the descriptor length to determine
the start of the next descriptor in the configuration table. To not use config^name, set len
to 52 and move only the first 52 bytes of the descriptor to the configuration table. To include
config^name, set len to 116 and move the entire descriptor to the configuration table.
config^name^s
is the string representation of the configuration name of the device.
DEVICE^SVNET^DESC^G05 463