Measure Reference Manual

MEASCOM /SWAP $SYSTEM/ START MEASSUBSYS
MEAS 3020
WARNING. No current data file; select a current data file using ADD.
Cause
The command executed required a current measurement data file to perform its function.
Effect
The requested operation is ignored.
Recovery
Perform an ADD MEASUREMENT on the data file desired.
MEAS 3021
WARNING. Measurement not active; unable to perform request.
Cause
This command is valid only when the measurement is currently active.
Effect
The requested operation is ignored.
Recovery
Informative message only; no corrective action is needed.
MEAS 3022
WARNING. No more configuration data is available.
Cause
There are no more entities configured for the type requested.
Effect
The requested operation is ignored.
Recovery
Restart the search or change to another entity type.
MEAS 3023
WARNING. CRVSN was not specified, translation may not be correct.
Cause
A Guardian file name was specified in a LISTPNAME command without specifying the CRVSN
qualifier.
Effect
Translation of the Guardian file name to an OSS file pathname is attempted, but the reported
name might be incorrect if the file name specified is a transient entity.
Recovery
Include the CRVSN value as reported in Measure entity reports.
MEAS 3024
WARNING. OSS journal segment is under construction, not attached.
Cause
An ADD MEASUREMENT command was entered for a data file that was still in the process of
OSS journal segment construction at measurement shutdown.
Effect
The file is opened successfully, but the OSS journal segment is not attached.
500 Error Messages