Measure Reference Manual

Cause
When Measure expanded the command, a buffer became full.
Effect
The requested command is ignored.
Recovery
Break the command into several commands and execute the commands separately, or qualify
any file names present so MEASCOM performs a minimum of expansion.
MEAS 3084
The DISCOPEN and DISKFILE entities require the filename to be either a
permanent or temporary disk filename (e.g. $a.b.* or $system.#*).
Cause
The current file name is not a valid disk file name
Effect
The requested command is not executed.
Recovery
Change the file name entered to a valid permanent or temporary disk file name.
MEAS 3085
"char" not allowed in current string; delete symbol and retry.
Cause
The symbol displayed by the error message is not a valid word separator for the string entered.
Effect
The requested operation is ignored.
Recovery
Either remove the character or replace it with a valid word separator, and then retry the command.
MEAS 3086
START attempted on an ADDed datafile; DELETE and then START.
Cause
START was attempted on a data file that was added for listing. Because the START command
causes the data to be purged, the command is aborted. The commands START, STOP, or ADD
cause the data file to be added in the MEASCOM environment. This message is an attempt to
prevent accidental purging of data.
Effect
The requested operation is aborted.
Recovery
If you still need the START operation, DELETE the data file and retry the START.
MEAS 3087
Expecting Help key length of 30 characters or less; shorten string.
Cause
The key string entered for the HELP command exceeds 30 characters.
Effect
The requested operation is not executed.
Recovery
Shorten the string.
508 Error Messages