Measure Reference Manual

Recovery
Try another command. To retrieve records, use the LIST command.
MEAS 3095
Command option "list-option" not allowed with LISTALL command when
STRUCTURED format is specified.
Cause
Illegal list-option was specified for the LISTALL command.
Effect
Command aborts; specified option is not satisfied.
Recovery
Retry the command, and do not include the list-option causing the error.
MEAS 3096
Command option "TOLERANCE OFF" not allowed with LIST command.
Cause
The TOLERANCE OFF option was specified on a C10 or previous data file.
Effect
Command aborts; MEASFH cannot satisfy request.
Recovery
Retry the command, and do not include the TOLERANCE option.
MEAS 3097
Error number was reported earlier on this data file. Operation cannot
be carried out.
Cause
When data file was added, MEASFH reported an error or warning. Problems might exist with
the data file.
Effect
Command aborts; command could not be carried out correctly.
Recovery
Try a different command on this data file.
MEAS 3098
FC and ! are not allowed on input longer than 132 characters; reenter
the desired command in full.
Cause
Although an effective record can contain up to 2100 characters, only effective records of 132
characters or fewer are candidates for modification using the FC command or for reexecution
using the ! command.
Effect
No command is executed.
Recovery
The desired command must be entered in full (use the editor and the OBEY command to execute
long commands).
MEAS 3099
Line specified is not in the HISTORY buffer; check buffer and retry.
510 Error Messages