Measure Reference Manual

Cause
The program file indicated did not read the startup message sent due to the file-system error
indicated.
Effect
The command is not executed.
Recovery
Correct the cause of the file-system error and retry the command.
MEAS 3104
SCALE-FROM must be less than SCALE-TO; make sure the values are correct
before retrying the LIST PLOT command.
Cause
The effective value for the SCALE-FROM attribute was greater than or equal to the SCALE-TO
attribute of the PLOT object.
Effect
The command is not executed.
Recovery
Perform a SHOW PLOT to determine the default values for each attribute. Any attribute entered
on the LIST PLOT command line overrides the default value. Ensure the effective values are
consistent when you retry the command.
MEAS 3105
Expecting one of the following keywords keyword-list.
Cause
The word encountered is not a valid keyword.
Effect
The command is not executed.
Recovery
Enter a valid keyword (some are displayed in the error text, but not all if the list is too long).
MEAS 3106
item-name is a valid item name, but it can only be used in the BY clause;
use a different item name, or a counter name that appears within the
entity report.
Cause
An item name was used in the IF clause that can only be used in the BY clause.
Effect
The command is not executed.
Recovery
Use a different item name, or use a counter name that appears within the entity report.
MEAS 3107
item-name is a valid item name, but it can only be used in the By and
IF clauses; use a counter name that appears within the entity report.
Cause
An item name was used in a PLOT command that can only be used in the BY and IF clauses.
Effect
The command is not executed.
512 Error Messages