Measure Reference Manual

Recovery
Reconfigure the PROCESSH measurement by reducing the number of code ranges (or taking out
some code spaces).
3272
(ERR^INVALID^TAPE^OP)
Cause
An invalid request was made on a tape data file.
Effect
The requested operation aborts.
Recovery
The request can only be made on a disk file. Use FUP COPY to copy the measurement data from
the tape to a disk file of code 175 and then retry the operation.
3273
(ERR^TRAP^OCCURRED)
Cause
The MEASFH process has trapped out.
Effect
The MEASFH process stops abruptly, and a saveabend file is created.
Recovery
If the trap number is 12 (%14), check the disk where the MEASFH work files were created. If
the disk is full or very fragmented, use the MEASCOM SWAPVOL command or the SWAP
parameter in the TACL RUN command to request that the MEASFH work files be created on
another disk. If the trap is not caused by the inability to create an extent, the CPU is short of
memory. In that case, try running the MEASFH process in a CPU with more memory. For traps
other than trap 12, copy the displayed information and report the problem to your service
provider.
3274
(ERR^UNKNOWNMSG)
Cause
The MEASFH version is incompatible. The MEASFH process received a request it could not
understand. Either the request is not implemented in the current MEASFH PVU, or the request is
of an invalid type.
Effect
The MEASFH process ignored the request.
Recovery
If the request is valid, use a MEASFH file that supports the new request. Otherwise, supply a
valid request.
3275
(ERR^WRONGRELEASE)
Cause
An incompatible MEASFH version was specified.
Effect
The requested operation aborts.
Recovery
Specify the correct MEASFH version and retry the command.
533