Measure Reference Manual

Cause
The MEASFH process was not able to read the COFF file further.
Effect
The operation was not performed.
Recovery
Designate a proper COFF file and retry the MEASCOM ADD PROCESSH command.
3286
(ERR^EDIT^NOT^ASCEND)
Cause
The MEASFH process was not able to perform the requested operation because the native
address in the edit file was not in ascending order.
Effect
The requested operation aborts.
Recovery
Make changes in the edit file and retry the command.
3287
(ERR^NO^POOLSPACE)
Cause
MEASFH was not able to perform the requested operation. The MEASMON process cannot
obtain the memory space required to start this measurement.
Effect
The operation was not performed.
Recovery
Split the measurement into multiple measurements and retry the command.
3288
(ERR^NO^GINFO)
Cause
The MEASFH process was not able to read the COFF file further.
Effect
The operation was not performed.
Recovery
The COFF file is partially linked. Link the COFF file completely by passing it through the Native
Mode Linker, NLD without the -r option, and then retry the operation with the output of the linker
process.
3289
(ERR^DATAFILE^INCOMPLETE)
Cause
One or more CPUs ran out of CIDs, counter space, or both. Consequently, the data file is
incomplete.
Effect
The data file does not contain complete information for the measurement.
Recovery
Retry the measurement with fewer entities specified. For more information, see the EMS log.
536 Error Codes