Measure Reference Manual

+ ADD PROCESSH $SYSTEM.SYS00.TCPIP (ULR $SYSTEM.SYS00.ZCRTLSRL)
+ ADD PROCESSH $SYSTEM.SYS00.TCPIP (SCR $SYSTEM.SYS00.TSYSCLR)
+ ADD PROCESSH $SYSTEM.SYS00.TCPIP (SLR $SYSTEM.SYS00.TSYSCLR)
+ INFO PROCESSH
Add Processh $SYSTEM.SYS00.TCPIP ($SYSTEM.SYS00.TCPIP)
Add Processh $SYSTEM.SYS00.TCPIP ($SYSTEM.SYS00.ZCRESRL)
Add Processh $SYSTEM.SYS00.TCPIP ($SYSTEM.SYS00.ZINETSRL)
Add Processh $SYSTEM.SYS00.TCPIP ($SYSTEM.SYS00.ZLANCSRL)
Add Processh $SYSTEM.SYS00.TCPIP ($SYSTEM.SYS00.ZCRTLSRL)
Add Processh $SYSTEM.SYS00.TCPIP ($SYSTEM.SYS00.TSYSCLR)
INFO COUNTER
The INFO COUNTER command displays, for one or more user-defined counters, the counter name
and type, and the names of any processes that modify the counter.
Syntax
INFO [ / OUT filename / ] [ COUNTER ]
counter-name [ , counter-name ] ...
OUT filename
directs command output to filename. If filename does not exist, MEASCOM creates an
EDIT file by that name and writes command output to it. If filename exists, MEASCOM opens
the file and appends command output to it.
After the INFO command executes, MEASCOM resumes writing its output to the current OUT
file (typically, the terminal).
The OUT option does not affect the contents of a log file.
COUNTER
is optional if you have specified COUNTER as the default command object by using the ASSUME
command.
counter-name
is a counter name or an asterisk (*) to indicate all counters.
Related Commands
PageFunctionCommand
43Adds a user-defined counter to the configurationADD COUNTER
53Deletes a user-defined counter from the configurationDELETE COUNTER
Usage Note for All PVUs and RVUs
MEASCOM displays the information as a list of the commands used to define the counters. This
feature lets you use /OUT filename/ to create a command (OBEY) file where you can later
restore the current set of counters.
When you save user-defined counter information, you might also want to save the current USERDEF
configuration information. To save the user-defined configuration information, use the INFO USERDEF
command with an OUT parameter.
Usage Note for G-Series PVUs
In Measure G12 and later PVUs, code-space identifiers are displayed only for TNS code files
(including accelerated TNS code files).
Example
To display all user-defined counters in the current configuration:
INFO COUNTER 63