Measure Reference Manual

Cpu-Busy-Time 36.29% Swaps 0.42
Ending-Free-Mem 4092 Ending-UCME 0
+ LIST CPU 1, FROM 12:30, TO 12:45
Cpu 1 VLX Initial Lock Pgs 2048 Mem Pages 8192
Memory MB 16 PCBs 256 Page Size 2048
Local System \BUYER From 5 Nov 1994, 12:30:24 For 15 Minutes
Cpu-Busy-Time 15.05% Swaps 0.05
Ending-Free-Mem 4092 Ending-UCME 0
• If you are examining a measurement data file from a remote system, you must use complete
specifications when referencing files within the data file. For example, to display a FILE report
on a local system (named \BILLS), you enter:
+ LIST FILE *
File Open $NEW01.MEAS.QCPU4A
Device Type 3
Opener Process: CPU 3 PIN 37 File Number 1
Local System \BILLS From 24 Oct 1994, 10:01:08 For 0.1 Seconds
Reads 45.46
Writes
++
File Open \BILLS.03,037
Device Type 0
Opener Process: CPU 3 PIN 39 File Number 2
Local System \BILLS From 24 Oct 1994, 10:01:08 For 0.2 Seconds
Reads
Writes 86.28
++
Whereas, to examine the file from \ACCT, to display the first file of the previous example,
you enter:
+ LIST FILE \BILLS.$NEW01.MEAS.QCPU4A
Then, to display the second file in the example, you must use the CPU, PIN, and file number
because the file name (as listed by MEASCOM) points to a different system:
+ LIST FILE \BILLS.$*.*.* (3,39,2)
• To display collected PROCESSH samples in BRIEF format:
+ RESET REPORT *
+ SET REPORT FORMAT BRIEF
+ LIST PROCESSH *, RATE OFF, IF CODE-RANGE > 0
Process 1,47 Pri 168 Device Name $SYSTEM
Program $SYSTEM.SYS46.FUP
Userid 255,255 Creatorid 255,255 Ancestor 1,37 ($Z02M)
Local System \RAMBLER From 10 Sep 2004, 13:22:08 For 22.2 Seconds
Total samples = 69 #
Code-Map UC.0 Samples 1 # 1.45 % of total
Code file $SYSTEM.SYS46.FUP:134451329318623
Code-Map UC.1 Samples 2 # 2.90 % of total
Code file $SYSTEM.SYS46.FUP:134451329318623
Code-Map NATIVE Samples 65 # 94.20 % of total
Code file $SYSTEM.SYS46.OSIMAGE:134451333766514
Code-Map NATIVE Samples 1 # 1.45 % of total
Code file $SYSTEM.SYS46.OSIMAGE:134451333766514
• To display collected PROCESSH samples in the default format (with CR-NAME-LEN SHORT,
CR-NAME-FORM STANDARD, and CR-NAME-QUAL UNQUALIFIED):
+ LIST PROCESSH 1,47,BY CODE-RANGE,IF CODE-RANGE > 0
Process 1,47 Pri 168 Device Name $SYSTEM
Program $SYSTEM.SYS46.FUP
Userid 255,255 Creatorid 255,255 Ancestor 1,37 ($Z02M)
LIST entity-type 77