Measure Reference Manual

LINE and NETLINE
LISTACTIVE [ LINE | NETLINE ] [ WAN-spec [ , listactive-spec ]
WAN-spec
identifies the line to measure, specified as one of:
{ cpu ( line-name ) }
{ cpu ( trackid , clip , line ) }
cpu
is the number of the processors, in the range 0 through 15. The default is all CPUs.
line-name
is the name of the line, in the form $name7, where name7 is up to seven characters.
trackid
is the number of the track, in the form %Hhexnum6, where hexnum6 is up to six characters.
The default is all track IDs.
clip
is the number of the CLIPs, in the range 1 through 6. The default is all CLIPs.
line
is the number of the lines, either 0 or 1. The default is both lines.
PROCESS, SQLPROC, and USERDEF
LISTACTIVE [ PROCESS | SQLPROC | USERDEF ] [ process-spec [ , listactive-spec ]
process-spec
identifies the process to measure, specified as one of:
{ cpu,pin }
{ $process-name ( cpu,pin ) }
{ [[device.]subvolume.]filename[:crvsn] [ ( cpu,pin ) ] }
cpu,pin
is the PID where cpu is in the range 0 through 15, and pin is in the range 0 through
65534.
$process-name
is the name of the process.
$device
is the volume (device) on which the object file of the process is located.
subvolume
is the subvolume on which the object file of the process is located.
filename
is the name of the object file of the an executing process.
:crvsn
In Measure G09 and later PVUs, is the timestamp, creation version serial number (CRVSN),
of file name extension necessary to form a unique file name. To get the CRVSN for a file,
see the Measure report or use the LISTGNAME command.
TERMINAL
LISTACTIVE [ TERMINAL ] [ terminal-spec [ , listactive-spec ]
terminal-spec
identifies the terminal to measure, specified as:
92 MEASCOM Commands