Measure Reference Manual

TOTALS { INCLUDE | ONLY | SUPPRESS }
ZERO-REPORTS { INCLUDE | SUPPRESS }
ZERO-VALUES { INCLUDE | SUPPRESS }
For more detailed syntax and descriptions of these list options, see the LIST entity-type
(page 68) command.
Related Commands
PageFunctionCommand
68Displays a report of selected entitiesLIST entity-type
86Displays a report on an active entityLISTACTIVE entity-type
109Sets the report format optionsSET REPORT
Usage Notes for All PVUs and RVUs
• If a measurement has no intervals or if entity-type is PROCESSH, the LISTALL command
produces the same result as the LIST entity-type command.
• The LISTALL command can be used only with data file versions C20 and later.
• If the STRUCTURED report option is used (to send the report to a structured file), these list
options are not allowed:
BY item-name
RATE ON
Usage Notes for H-Series and J-Series PVUs and RVUs
• In H06.25/J06.14 and later RVUs, when generating a report for a data file that has been
split using the MEASFT SPLIT BY TIME command, you should specify FROM and TO options
(within the time period of the TIME-split data file) in the LISTALL entity-type command to
ensure fidelity between Measure reports done on the original data file with those done on the
TIME-split data file.
• In H06.23/J06.12 and later RVUs, the LISTALL DISC command for CLIM-attached disks supports
the partition number as an optional DISC specification parameter. The partition number is the
number assigned to a partition within a partitioned disk. Use of PARTITION to specify the
partition number in the IF and BY clauses is also supported.
In addition, the partition number for CLIM-attached disks will be displayed by the LISTALL DISC
command if the partition number was specified for the measurement.
• In Measure H04/J02 and later PVUs for the CPU and PROCESS entities, if the PROCESSH
sample count is unchanged from the start to the end of a measurement interval, the
NATIVE-BUSY-TIME, ACCEL-BUSY-TIME and TNS-BUSY-TIME fields will not be displayed by
MEASCOM even if a PROCESSH measurement is active. For the LISTALL command, this means
some intervals might display those fields and others might not.
• In Measure H04/J02 and later PVUs, the LISTALL command creates a format 1 or format 2
structured file, depending upon the measurement data file size, if the report output file is a
structured file.
• In Measure H03/J01 and later PVUs, the LISTALL command allows SERVERNET, DEVICE, and
DISC entity specifications using CLIMs. For syntax and examples, see the SERVERNET
(page 323), DEVICE (page 179) and DISC (page 189) entities.
96 MEASCOM Commands