Mid-Range Silo Media Manager Installation and User's Guide (G06.27+)

Mid-Range Silo Media Manager Quick Start Guide

Mid-Range Silo Media Manager Installation and User’s Guide—541530-001

A-6

E-mail Version of MSMM Software (Client)

If you have MSMM CLIENT systems (NonStop systems with tape drives in the library,

but that the library control path is not physically attached to), you can unzip the client

zip file to another directory on your PC, and use the GUI to place those files on the

client systems. They configure the same way.

1. On the MSMM CLIENT systems, do the following:

2. RUN CONFIG to create a new configuration file. You will have to give it a

password (this the password that will allow access to MSMM).

3. Type in CONFIG_HOMETERM and enter a home terminal (normally $ZHOME on

the S-series NonStops)

4. Type in CONFIG_HOSTPORT# and choose the port number you configured on the

server. This is the port that the client will use to communicate with the server

through.

5. Type in CONFIG_CLNTPORT# and choose a port number that is at least 10 away

from the SERVER port number

6. OBEY your MSMM CLIENT STARTUP FILE

Example A-3. Client STARTUP File

clear all

param tcpip^process^name $zb01a

run $system.tsimsmmc.tsimsmmc0/name $MSMMC, nowait, pri

190, term $zhome, out $zhome, CPU 0/

Example A-4. Configured MSMM CLIENT CONFIG Program

TSI-> view_config

DEVICE CONFIGURATION:

------------------------

CLIENT PORT#: 9876

HOST PORT#: 6001

HOST IP ADDRESS: 192.168.1.99

HOME TERM: $ZHOME