N1524A ACL Installation and User's Guide for the NonStop S-Series Tape Enclosure

Operating the Tape Drive
N1524A ACL Installation and User’s Guide for the NonStop S-Series Tape Enclosure—527340-001
4-8
Buttons
•
Loading
•
Unloading
•
Calibrating
The screen's second line displays possible status conditions of the library robotics:
•
Loader Idle
•
Fetch
•
Stow
•
Diag Active
•
Diag Complete
•
Taking Inventory
•
Elevator Home
•
Checking Drive(s)
•
Orphaned Cartridge
•
Trapped Cartridge
•
Scanning Labels.
The third line in Figure 4-4
represents a map of the tape magazine. A 11-slot
tape magazine is shown. The number 1 shows the location of slot 1 (the front
slot) in the map. The number 11 shows the location of slot 11 (the rear slot) in
the map. A rectangle on this line indicates that a cartridge is present in the
corresponding slot of the tape magazine. An underline means that no cartridge
is present.