N1524A ACL Installation and User's Guide for the NonStop S-Series Tape Enclosure

Operating the Tape Drive
N1524A ACL Installation and User’s Guide for the NonStop S-Series Tape Enclosure—527340-001
4-34
Loading and Unloading Tape Cartridges
Press Enter to select LTO1. In Figure 4-24, two changes occur in the display:
•
The * reappears at the beginning of line 2, indicating that a selection has
been made.
•
The ! now moves to line 4, indicating that a destination has been selected.
Press Enter to select Slot 1 as the destination. There is an
! at the end of line
4. Additional choices are available because 1) a tape drive has been selected as
the source, so the destination must be a slot, and 2) all of the slots except Slot 1
Figure 4-24. Load/Unload To Entry Screen