N1524A ACL Installation and User's Guide for the NonStop S-Series Tape Enclosure

Troubleshooting
N1524A ACL Installation and User’s Guide for the NonStop S-Series Tape Enclosure527340-001
A-2
Recovering from Errors
3. Press Enter to select the menu.
4. At the Show History menu, press the down button once so that the cursor in the
display is next to Error History.
5. Press the Enter button to select the function. A circular list of 4-line error reports
appears in the format shown in Figure A-2.
6. Using the up and down buttons, scroll the list to display the error history of the tape
drive.
Recovering from Errors
Fault Symptom Codes are listed in Table A-2. Error Recovery Procedures (ERP) are
described in detail in Table A-1. ERP are listed for each FSC.
Error Recovery Procedures
Table A-1 gives error recovery instructions for errors reported on the front panel. This
list includes only those procedures that can safely perform by an operator. Appendix C,
Figure A-2. Error History Screen