N1526A and N1527 ACL Tape Drive Installation and User's Guide
Table Of Contents
- What’s New in This Manual
- About This Manual
- 1 Overview and Features
- 2 Setting Up the ACL Tape Drives
- 3 Installing and Configuring the ACL Tape Drive for the NonStop S-Series Server
- 4 Operation
- 5 Maintenance
- 6 Troubleshooting
- A Specifications
- Safety and Compliance
- Index
Installing and Configuring the ACL Tape Drive for the
NonStop S-Series Server
N1526A and N1527A ACL Tape Drive Installation and User’s Guide—542756-003
3-4
Installation
10. Attach the male end of the power cord to an AC power outlet.
11. Toggle the power switch at the rear of the tape drive to the on position.
12. Press the GUI screen at the front of the tape drive to activate the library.
13. Verify that the drive powers on.
Figure 3-3. Rear View of Tape Drive
WARNING. The tape drive does not have protection against lighting surges. For this reason, if
you are located in a high risk area, use external surge protection rated for use in your location
and be able to handle the power requirements of the tape drive enclosure.
Terminator VHDCI SCSI Cable SCSI Cable LVD Terminator