NBT Manual

NBT Event Messages

NBT Manual—424773-001

A-8

znbt-evt-subnet-not-found

Cause. Subnet subnet-name is not defined under the TCP/IP subsystem.

Effect. NBT was unable to connect to the subnet.

Recovery. If the spelling on the ADD DOMAIN statement is wrong, correct it and then

stop and restart NBT. If it is correct, check the TCP/IP system. NBT will recover

automatically when the TCP/IP subnet is properly configured.

znbt-evt-takeover

Cause. The NBT backup process became the primary process.

Effect. reason explains the manner in which the primary process stopped.

Recovery. If the failure is due to a primary process failure, check for other events that

would indicate an NBT failure. NBT will automatically restart a new backup whenever

the appropriate processor is available.

znbt-evt-trace-error

Cause. The trace file was not opened to disk file fname. status1 and status2 are internal

NBT variables.

Effect. The trace was not started.

Recovery. Report this problem to your Compaq support representative.

znbt-evt-trace-object

Cause. A trace file could not be opened because of a problem reading the NBT object

file.

Effect. The trace mechanism needs to copy finite-state machine transition tables from

the object files to the trace file, which are used later by NBTGTRED.

Recovery. Verify that the object file is secured to allow read access to the user ID of

the NBT process. If the problem persists, contact your Compaq support representative.

pname Domain domain Subnet subnet-name not defined

pname Backup process takeover due to: reason

pname Trace not started to fname size size error status1 /

status2

pname Trace not started to fname; error reading object file