NBT Manual

NBT Event Messages

NBT Manual—424773-001

A-3

znbt-evt-backup-stopped

Cause. The NBT backup process stopped as a result of an NBTCOM BACKUP

command, processor failure, or backup process failure.

Effect. NBT will recreate the backup process when a backup processor is available,

unless the backup process was stopped by the NBTCOM command.

Recovery. No action is required.

znbt-evt-checkalloc

Cause. During backup creation, NBT could not allocate an extended segment for the

buffer pool in the backup process.

Effect. The NBT backup process was not started.

Recovery. See znbt-evt-alloc

. Correct the problem, then restart the backup process with

the NBTCOM BACKUPCPU command.

znbt-evt-ckopen-err

Cause. NBT encountered an error while checkpointing a file open to the backup

process. fecode is the result of the NonStop procedure CHECKPOINT.

Effect. The backup is stopped.

Recovery. Recovery is usually automatic. If the error persists, contact your Compaq

support representative.

znbt-evt-ckpt-fe

Cause. NBT encountered an error while checkpointing data to the backup process.

fecode is the result of the NonStop procedure CHECKPOINT.

Effect. The backup is stopped.

Recovery. Recovery is usually automatic. If the error persists, contact your Compaq

support representative.

pname Backup stopped

pname Checkallocatesegment err status

pname Checkopen err fecode file fname

pname Backup checkpoint err fecode