NBX Manual

Glossary
NBX Manual—424774-001
Glossary-4
FASTP
FASTP. Net Spool print process.
filter. In Event Management Service (EMS)
, a file containing a list of criteria against which
incoming event messages can be compared. The messages are allowed to pass (all
criteria met) or not pass (one or more criteria failed). In the ServerNet LAN systems
access (SLSA) subsystem, a filter provides a logical mechanism where frames received
from the local area network (LAN) can be sorted and then delivered to a particular
client.
forwarding distributor. An Event Management Service (EMS)
distributor process that sends
selected event messages to an EMS collector on another network node.
gateway. A special-purpose, dedicated computer that attaches to two or more networks and
routes packets from one to the other. In particular, an Internet gateway routes IP
datagrams among the networks to which it connects. Gateways route packets to other
gateways until they can be delivered to the final destination directly across one physical
network. The term is loosely applied to any machine that transfers information from one
network to another, as in mail gateway.
IEEE. See Institute of Electrical and Electronics Engineers (IEEE)
.
INFO. A nonsensitive command
that displays the attributes of a NonStop IPX/SPX object.
Information Xchange Facility (IXF). A Compaq software product that provides file transfer
support between a Compaq system and IBM-compatible PCs.
Institute of Electrical and Electronics Engineers (IEEE). An international industry group
that develops standards for many areas of electrical engineering and computers.
interactive command. In the Subsystem Control Facility (SCF)
, a command entered by a
human operator rather than by a program. See also programmatic command.
Internetwork Packet Exchange (IPX). The Novell protocol for connectionless,
internetwork-wide packet delivery. See also connectionless service
.
IPX. See Internetwork Packet Exchange (IPX)
.
IPXMGR process. A Compaq process that provides the NonStop IPX/SPX subsystem with
an interface to the Subsystem Control Facility (SCF)
and supports Distributed Systems
Management (DSM) functions.
IPXPROTO process. A Compaq process that supports the following protocols on the
NonStop IPX/SPX subsystem: Internetwork Packet Exchange (IPX)
, NetWare Core
Protocol (NCP), Routing Information Protocol (RIP), Sequenced Packet Exchange
(SPX), and Service Advertising Protocol (SAP).
IXF. See Information Xchange Facility (IXF)
.
LAN. See local area network (LAN)
.