NBX Manual

NBX Commands
NBX Manual—424774-001
3-8
ADD DOMAIN
ADD DOMAIN
ADD DOMAIN defines a logical LAN. One ADD DOMAIN is required to operate
NBX.Do not use more than one DOMAIN.
If the NODE^ALIAS command is used, it must precede any ADD DOMAIN
commands. You do not need to start the NonStop IPX process before using the ADD
DOMAIN command.
If the DEFAULT DOMAIN command is set to FIRST^ADDED, the first domain you
add using the ADD DOMAIN command automatically becomes the default domain.
domain-name
defines the domain uniquely and must start with a pound sign (#) followed by a
letter, then optionally by letters or numbers up to eight characters maximum. The
domain name is referenced in the ADD WINDOW and DEFAULT DOMAIN
commands, and in the NCB2.NCB^RESOURCE field of WSPTP requests when:
NCB2.NCB^RESOURCE^TYPE = NCB^RESOURCE^DOMAIN = 2.
SUBNET proto-name
refers to a NonStop IPX protocol process, such as $ZNV0.
DEFAULT
defines this domain as the default domain.
Note. Only one ADD DOMAIN should be used per NBX process.
ADD DOMAIN domain-name
,SUBNET proto-name
[,DEFAULT ]