NBX Manual

NBX Commands
NBX Manual—424774-001
3-30
IPX^SESS^TO
IPX^SESS^TO
IPX^SESS^TO controls the time interval for NBX to wait for any session messages
from the remote before terminating the session. NBX expects to receive session
messages as a result of normal inbound traffic, acknowledgments to normal outbound
traffic or keep-alive messages, or normal inbound keep-alive messages. If nothing is
received for this time period, the session is terminated.
Use a longer timeout if long delays are common, such as might occur in a configuration
with WAN routers.
To display the current setting of this parameter, use the INFO PROCESS command.
n
specifies a time interval in the range of 10 through 600 in 1 second units (10 seconds
to 10 minutes). The default is 120 (2 minutes).
IPX^SESS^TO should be set to a value greater than IPX^KA.
IPX^SESS^TO n