NBX Manual

NBX Manual—424774-001
4-1
4
NBX Usage
This section provides the following information and recommendations on using NBX
with other applications:
•
Using NBX With Pathway
•
Using WSPTP NCB Applications
•
Commands Not Supported by NBX
•
Presentation Interface
•
Troubleshooting
•
Using NBXGTRED
•
Using the NBTEST / RML Utility program
Using NBX With Pathway
When preconfiguring terminals, you should use both of the following:
PATHCOM - SET TERM AUTORESTART 10
NBXCOM - CONTROL^11 Y
If the SCOBOL application captures errors, or has a LOGOFF command, it should use
RECONNECT MODEM upon detection of any error or upon the logoff request.
To simplify configuration, you can use NBXCOM AUTO^ADD and DEFAULT
SERVICE. Set
AUTO^ADD Y
DEFAULT SERVICE name
where name matches the static window name in the PCT/TTE configuration.
In PATHCOM, add sufficient TERM entries to support the peak simultaneous session
load, and use any convenient window name in the ADD TERM FILE field, for example.
SET TERM FILE $NBX.#PW01 ($NBX.#PW02 ...)
When using the DEFAULT SERVICE feature, all workstations can share the identical
configuration file.