NBX Manual

NBX Usage
NBX Manual—424774-001
4-9
Using the NBTEST / RML Utility program
machine
specifies the NetBIOS machine name. The machine name must match the Computer
Name displayed on the Network Control Panel Identification screen. NBTEST will
perform any checks on this value.
host
is the Expand Node name of the NSK system.
adapter
is the specified NetBIOS stack or adapter for NBTEST on PC’s running multiple
NetBIOS stacks. The default is 0, and values from 0 to 9 are allowed. Typically,
Windows 95/98/NT uses adapter 0 for RFC1001 TCP/IP (used with NBT), adapter 6
for Netbeui, and adapter 7 for IPX (used with NBX).
Self-explanatory messages will be displayed that indicated successful completion or any
errors encountered during the NBTEST LOGON command.
RMPCCOM LOGOFF using the NBTEST RML Function
NBTEST.EXE provides the RMPCCOM LOGOFF functionality.
The NBTEST RML function syntax to perform an RMPCCOM LOGOFF is
machine
specifies the NetBIOS machine name. The machine name must match the Computer
Name displayed on the Network Control Panel Identification screen. NBTEST will
perform any checks on this value.
host
is the Expand Node name of the NSK system.
adapter
is the specified NetBIOS stack or adapter for NBTEST on PCs running multiple
NetBIOS stacks. The default is 0, and values from 0 to 9 are allowed. Typically,
Windows 95/98/NT uses adapter 0 for RFC1001 TCP/IP (used with NBT), adapter 6
for Netbeui, and adapter 7 for IPX (used with NBX).
NBTEST LOGOFF
MACHINE=machine
HOST=host
[ ADAPTER=adapter ]