NBX Manual

NBX Event Messages
NBX Manual—424774-001
A-3
znbx-evt-backup-stopped
znbx-evt-backup-stopped
Cause. The NBX backup process stopped as a result of an NBXCOM BACKUP
command, processor failure, or backup process failure.
Effect. NBX will recreate the backup process when a backup processor is available,
unless the backup process was stopped by the NBXCOM command.
Recovery. No action is required.
znbx-evt-checkalloc
Cause. During backup creation, NBX could not allocate an extended segment for the
buffer pool in the backup process.
Effect. The NBX backup process was not started.
Recovery. See znbx-evt-alloc
. Correct the problem, then restart the backup process
with the NBXCOM BACKUPCPU command.
znbx-evt-ckopen-err
Cause. NBX encountered an error while checkpointing a file open to the backup
process. fecode is the result of the NonStop procedure CHECKPOINT.
Effect. The backup is stopped.
Recovery. Recovery is usually automatic. If the error persists, contact your Compaq
support representative.
znbx-evt-ckpt-fe
Cause. NBX encountered an error while checkpointing data to the backup process.
fecode is the result of the NonStop procedure CHECKPOINT.
Effect. The backup is stopped.
Recovery. Recovery is usually automatic. If the error persists, contact your Compaq
support representative.
pname Backup stopped
pname Checkallocatesegment err status
pname Checkopen err fecode file fname
pname Backup checkpoint err fecode