NBX Manual

NBX Event Messages

NBX Manual—424774-001

A-6

znbx-evt-not-super-group

Cause. $NBX was started by a user ID not in the SUPER group.

Effect. The process stops.

Recovery. Log on to a SUPER group user ID and restart NBX.

znbx-evt-parm-error

Cause. Either param-name is an invalid PARAM for NBX, or param-value is

syntactically incorrect or out of range.

Effect. The PARAM is ignored and NBX starts up with default values for the particular

PARAM. If param-name is GFTCOM^XXX, then one or two, but not all three, of the

GFTCOM^OBJECT, GFTCOM^IN, and GFTCOM^OUT PARAMs were specified.

Recovery. Correct param-name and param-value, then stop and restart NBX.

znbx-evt-reply-error

Cause. NBX received a NonStop file system error fecode when replying to an

application request.

Effect. This message provides additional information useful when other errors are

detected.

Recovery. No action is required. If other problems are detected, include this

information in a trouble report.

znbx-evt-starting

Cause. This message is displayed at NBX startup time. program-name includes the full

NBX version and release date.

Effect. This message is given for your information only.

Recovery. No action is required.

pname Must be run from SUPER group

pname Error in PARAM param-name param-value

pname Reply error fecode