NetBatch Management Programming Manual

Error Numbers and Error Lists

NetBatch Management Programming Manual—522462-003

A-7

524 ZBAT-WRN-ALTER-TAPEDRIVES

Token

ZSPI-TKN-ERROR

is the standard SPI error token. Its value consists of the NetBatch subsystem ID

and the error number ZBAT-WRN-ALTER-TAPEDRIVES (524). This token is

always present in the error list.

Cause. The ALTER JOB command specified, for an executing, over-limit, or

suspended job, more tape drives than were available.

Effect. The command executed successfully, but the scheduler assigned only spare

tape drives to the job, not the required number. The scheduler reserves the spare

drives for the job (thus preventing other jobs from using them), but the drives shortfall

remains.

Recovery. Use the SUSPEND JOB command to suspend the job if it is executing or

over limit. Next, use the STATUS SCHEDULER command to monitor tape drive

availability. When the number of drives available equals the drive shortfall, retry the

ALTER JOB command, specifying the job’s full drive requirement in the ZTAPEDRIVES

field of ZBAT-MAP-DEF-JOB.

ZSPI-TKN-ERRLIST token-type ZSPI-TYP-LIST

ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR

ZSPI-TKN-ENDLIST token-type ZSPI-TYP-SSCTL