NetBatch Management Programming Manual

Common Definitions
NetBatch Management Programming Manual—522462-003
4-4
Information About SPI Standard Definitions Specific
to the NetBatch Subsystem
Information About SPI Standard Definitions Specific to the
NetBatch Subsystem
The SPI Programming Manual fully describes all SPI standard definitions. Information
about the definitions that is specific to the NetBatch subsystem is:
ZSPI-SSN-ZBAT
is the NetBatch subsystem number (9).
ZSPI-TKN-COMMAND
contains a command number of a NetBatch command. The value of this token is
always one of these enumerated ZBAT-CMD-name or ZSPI-CMD-name values of
ZBAT-DDL-COMMAND:
For a description of ZBAT-DDL-COMMAND, see Private Token and Field Types on
page 4-13. For descriptions of NetBatch commands, see Section 5, Commands
and Responses.
ZSPI-TKN-ERROR
is the error token. Its value consists of the NetBatch subsystem ID and an error
number describing the error. For descriptions of NetBatch error numbers and their
associated error lists, see Appendix A, Error Numbers and Error Lists.
ZSPI-TKN-OBJECT-TYPE
contains an object-type number of a NetBatch object. The value of this token is
always one of these enumerated ZBAT-OBJ-name values of ZBAT-DDL-OBJECT.
The object types associated with a command vary with each command.
The object type of command ZSPI-CMD-GETVERSION is ZSPI-VAL-NULL-
OBJECT-TYPE.
For a description of ZBAT-DDL-OBJECT, see Private Token and Field Types on
page 4-13. For information on the object types that are valid for specific
commands, see Section 5, Commands and Responses.
name
ZBAT-CMD- ABORT INFO SHUTDOWN SUBMIT
ACTIVATE RELEASE START SUSPEND
ADD RUNNEXT STATUS SWITCHCPU
ALTER RUNNOW STOP SWITCHLOG
DELETE
ZSPI-CMD- GETVERSION
name
ZBAT-OBJ- ATT-SET EXECUTOR JOB SCHEDULER
CLASS