NetBatch Manual

Commands
NetBatch Manual—522460-004
6-54
ALTER ATTACHMENT-SET Command
3} INFO ATTACHMENT-SET STANDARD, ASSIGN, DEFINE, PARAM
ATTACHMENT-SET ATTRIBUTES for (SUPER.NB)STANDARD
attachments: DEFINE =LOC, CLASS SPOOL, LOC \SYS1.$S
DEFINE =_DEFAULTS, CLASS DEFAULTS,
VOLUME $A.NB
ASSIGN FILE-X, X
ASSIGN FILE-Y, Y
PARAM A 1
PARAM B 2
°
By resetting ASSIGNs and PARAMs. For example:
7} CHANGEUSER FPP.MANAGER psswrd
7} INFO ATTACHMENT-SET OPS, ASSIGN, PARAM
ATTACHMENT-SET ATTRIBUTES for (FPP.MANAGER)OPS
attachments: ASSIGN BCKPS-DLY, $A.NB.DLY, EXCLUSIVE,
INPUT, EXT 256, BLOCK 4096
PARAM TIME 14:30
8} ALTER ATTACHMENT-SET OPS, (ASSIGN BCKPS-DLY,
$BIG1.NB.DLY), (PARAM TIME 15:15)
Attachment-set (FPP.MANAGER)OPS altered
9} INFO ATTACHMENT-SET OPS, ASSIGN, PARAM
ATTACHMENT-SET ATTRIBUTES for (FPP.MANAGER)OPS
attachments: ASSIGN BCKPS-DLY, $BIG1.NB.DLY
PARAM TIME 15:15
°
By altering or removing attributes of DEFINEs. For example:
20} CHANGEUSER NB.USER psswrd
20} INFO ATTACHMENT-SET 19, DEFINE =TAPE
ATTACHMENT-SET ATTRIBUTES for (NB.USER)19
attachments: DEFINE =TAPE, CLASS TAPE, VOLUME
SCRATCH, LABELS ANSI, FILEID
CUSTRECORDS, DEVICE
\MELBDEV.$TAPE
21} ALTER ATTACHMENT-SET 19, (DEFINE =TAPE, FILEID,
DEVICE \MELBQAT.$TAPE1)
Attachment-set (NB.USER)19 altered
22} INFO ATTACHMENT-SET 19, DEFINE =TAPE
ATTACHMENT-SET ATTRIBUTES for (NB.USER)19
attachments: DEFINE =TAPE, CLASS TAPE, VOLUME
SCRATCH, LABELS ANSI, DEVICE
\MELBQAT.$TAPE1
By omitting the value of a DEFINE attribute from the ALTER ATTACHMENT-
SET command, you remove that attribute from the DEFINE.
°
By altering SECURITY and TEMPORARY attributes. For example:
5} CHANGEUSER 255,255 psswrd
5} INFO ATTACHMENT-SET 23, SECURITY, TEMPORARY
ATTACHMENT-SET ATTRIBUTES for (SUPER.SUPER)23
security: "UUUU"
temporary: On
6} ALTER ATTACHMENT-SET 23, SECURITY "GOGO", TEMPORARY
OFF
Attachment-set (SUPER.SUPER)23 altered