NetBatch Manual

Commands
NetBatch Manual—522460-004
6-91
DISPLAY-SPI Command
Considerations
•
The DISPLAY-SPI command is available to all users.
•
The RUN NETBATCH command parameter DISPLAY-SPI is an alternative to the
DISPLAY-SPI command. The parameter makes the scheduler write to its log file
command and response buffers received from and sent to requesters such as
BATCHCOM. The buffers appear in the log file in the same format as in
BATCHCOM. For more information, see Running NETBATCH on page 3-10.
Example
This example shows BATCHCOM displaying the command and response buffers for
the command DELETE EXECUTOR EXEC-01:
17} DISPLAY-SPI ON
18} DELETE EXECUTOR EXEC-01
--------------------------------------
|_SPI_BUFFER_BEING_SENT_TO_SCHEDULER_|
--------------------------------------
Checksum: 0
Header Type: 0
Last error: 0
Last error code: tkn 29/4/-506
Last Position: SSCTL 8 -439
Max Field Version: 0
Maxresp: -1
Position: SSCTL 8 -442
Server version: 0 (0)00
Subsystem ID: TANDEM.9.D30
Used length: 69
DELETE (260)EXECUTOR (512)
TDT: CHAR:VAR; SEL-EXECUTORNAMEx1
7:EXEC-01
--------------------------------------
|_SPI_BUFFER_RETURNED_FROM_SCHEDULER_|
--------------------------------------
Checksum: 0
Header Type: 0
Last error: 0
Last error code: tkn 29/4/-506
Last Position: SSCTL 8 -439
Max Field Version: 0
Maxresp: -1
Position: SSCTL 8 -442
Server version: 17438 D30
Subsystem ID: TANDEM.9.D30
Used length: 86
DELETE (260)EXECUTOR (512)
START DATA LIST
TDT: CHAR:VAR; SEL-EXECUTORNAMEx1
7:EXEC-01
TDT: ENUM:2; RETCODEx1 0000