NetBatch Manual

Commands
NetBatch Manual—522460-004
6-132
SET ATTACHMENT-SET Command
$A.NB
ASSIGN ABC, $A.NB.ABC
PARAM X 24
2} SET ATTACHMENT-SET (ASSIGN DEF, $A.NB.DEF), (DEFINE =GHI,
CLASS MAP, FILE $A.NB.GHI), (PARAM Y 25), (ASSIGN ABC,
$DATA7.NB.ABC); SHOW ATTACHMENT-SET
ATTACHMENT-SET ATTRIBUTES
attachments: DEFINE =GHI, CLASS MAP, FILE \DEV.$A.NB.GHI
DEFINE =_DEFAULTS, CLASS DEFAULTS, VOLUME
$A.NB
ASSIGN ABC, $DATA7.NB.ABC
ASSIGN DEF, $A.NB.DEF
PARAM X 24
PARAM Y 25
3} RESET ATTACHMENT-SET; SHOW ATTACHMENT-SET
ATTACHMENT-SET ATTRIBUTES
attachments: DEFINE =_DEFAULTS, CLASS DEFAULTS, VOLUME
$A.NB
•
This example shows the LIKE qualifier used in a SET ATTACHMENT-SET
command:
6} SET ATTACHMENT-SET (DEFINE =A1, CLASS MAP, FILE $A.NB.X),
(DEFINE =B1, LIKE =A1), (DEFINE =C1, LIKE =B1)
7} SHOW ATTACHMENT-SET DEFINE =*1
ATTACHMENT-SET ATTRIBUTES
attachments: DEFINE =A1, CLASS MAP, FILE \DEV.$A.NB.X
DEFINE =B1, CLASS MAP, FILE \DEV.$A.NB.X
DEFINE =C1, CLASS MAP, FILE \DEV.$A.NB.X
•
This example shows the SET ATTACHMENT-SET command specifying various
attachment-set attributes in the working-attributes set. The set added after
execution of the command adopts the attributes. Note the use of the LIKE qualifier.
10} SHOW ATTACHMENT-SET
ATTACHMENT-SET ATTRIBUTES
attachments: DEFINE =_DEFAULTS, CLASS DEFAULTS, VOLUME
$A.NB
11} SET ATTACHMENT-SET (ASSIGN ACCOUNT-REC, $D6.FIN.ACCNT), &
}} (DEFINE =S, CLASS SPOOL, OWNER "255,1", LOC $S), &
}} (DEFINE =I, LIKE =S, LOC $I), (PARAM SHIFT NIGHT), &
}} SECURITY "AAAA", TEMPORARY OFF
12} SHOW ATTACHMENT-SET
ATTACHMENT-SET ATTRIBUTES
security: "AAAA"
temporary: Off
attachments: DEFINE =I, CLASS SPOOL, LOC \DEV.$I, OWNER
"255,1"
DEFINE =S, CLASS SPOOL, LOC \DEV.$S, OWNER
"255,1"
DEFINE =_DEFAULTS, CLASS DEFAULTS, VOLUME
$A.NB
ASSIGN ACCOUNT-REC, $D6.FIN.ACCNT
PARAM SHIFT NIGHT
13} ADD ATTACHMENT-SET #CURRENT
Attachment-set (SUPER.DRAT)2 added