NetBatch Manual

Attributes
NetBatch Manual—522460-004
7-52
DESCRIPTION Job Attribute
ATTACHMENT-SET ATTRIBUTES
attachments: DEFINE =TAPE1, CLASS TAPE, VOLUME "30 ",
LABELS ANSI, FILEID BACKUPS, DEVICE
\MELBDEV.$TAPE
DEFINE =_DEFAULTS, CLASS DEFAULTS, VOLUME
$DATA7.DEVBAKUP
2} SET ATTACHMENT-SET (DEFINE =TAPE2, LIKE =TAPE1, MOUNTMSG
"DAILY BACKUPS ONLY", DEVICE \MELBQAT.$TAPE)
3} ADD ATTACHMENT-SET BKUPS, (DEFINE =TAPE3, LIKE =TAPE2,
DEVICE \MELBORN.$TAPE)
Attachment-set (FPP.MANAGER)BKUPS added
4} INFO ATTACHMENT-SET BKUPS, DEFINE *
ATTACHMENT-SET ATTRIBUTES for (FPP.MANAGER)BKUPS
attachments: DEFINE =TAPE1, CLASS TAPE, VOLUME "30 ",
LABELS ANSI, FILEID BACKUPS, DEVICE
\MELBDEV.$TAPE
DEFINE =TAPE2, CLASS TAPE, VOLUME "30 ",
LABELS ANSI, FILEID BACKUPS, DEVICE
\MELBQAT.$TAPE, MOUNTMSG "DAILY
BACKUPS ONLY"
DEFINE =TAPE3, CLASS TAPE, VOLUME "30 ",
LABELS ANSI, FILEID BACKUPS, DEVICE
\MELBORN.$TAPE, MOUNTMSG "DAILY
BACKUPS ONLY"
DEFINE =_DEFAULTS, CLASS DEFAULTS, VOLUME
$DATA7.DEVBAKUP
5} ALTER ATTACHMENT-SET BKUPS, (DEFINE =_DEFAULTS, VOLUME
$DATA6.NBFILES)
Attachment-set (FPP.MANAGER)BKUPS altered
6} INFO ATTACHMENT-SET BKUPS, DEFINE =_DEFAULTS
ATTACHMENT-SET ATTRIBUTES for (FPP.MANAGER)BKUPS
attachments: DEFINE =_DEFAULTS, CLASS DEFAULTS, VOLUME
$DATA6.NBFILES
DESCRIPTION Job Attribute
The DESCRIPTION job attribute contains text that describes a job. The text appears in
the scheduler’s log file each time the job runs.
string
is a string of 1 through 1000 ASCII characters describing the job.
If you specify DESCRIPTION without string in an ALTER JOB command, the
scheduler removes the DESCRIPTION attribute from the job. Specifying
DESCRIPTION without string in a SET JOB command makes BATCHCOM
remove the DESCRIPTION attribute from the working-attributes set.
Considerations
•
A job submitted without the DESCRIPTION attribute has no descriptive text.
DES[CRIPTION] " [ string ] "