NetBatch Manual

Messages
NetBatch Manual—522460-004
A-5
Message Descriptions
0518-W
Cause. The dependent job received a second or subsequent release from its master
or a job with the same name as its master.
Effect. None.
Recovery. Not applicable unless the names of the jobs receiving the releases conflict.
In that case, make sure the jobs in the master-dependent relationship have names that
no other jobs use at any time.
0522-W
Cause. The remote volume specified by the VOLUME job attribute contains eight or
more characters (including the dollar ($) sign). Remote volume names cannot be more
than seven characters long (including $).
Effect. The command failed.
Recovery. Retry the command, specifying a seven-character remote volume name in
the VOLUME attribute. Alternatively, include the TACL VOLUME command in the job’s
input file if the job’s executor program is the TACL program.
0524-W
Cause. The ALTER JOB, TAPEDRIVES command specified, for an executing, over-
limit, or suspended job, more tape drives than were available.
Effect. The command executed successfully, but the scheduler assigned only spare
tape drives to the job, not the required number. The scheduler reserves the spare
drives for the job (thus preventing other jobs from using them), but the drive shortfall
remains.
Recovery. Use the SUSPEND JOB command to suspend the job if it is executing or
over limit. Next, use the STATUS SCHEDULER command to monitor tape drives
availability. When the number of drives available equals the drive shortfall, retry the
ALTER JOB command, specifying the full drive requirement in the TAPEDRIVES
attribute.
Job has already been released
File file-name cannot be referenced over network
Requested tape drives are unavailable. Assigning remaining
drives to your executing or suspended job.