Manualshelf

NetBatch Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series
531532533534535536537538539540
Messages
NetBatch Manual—522460-004
A-46
Message Descriptions
2210-E
Cause. The AFTER job attribute’s time option specified a seconds value outside the
allowable range 0 through 59.
Effect. The command failed.
Recovery. Retry the command, specifying a seconds value in the range 0 through 59.
2211-E
Cause. The AFTER job attribute’s time option specified a milliseconds value outside
the allowable range 0 through 999.
Effect. The command failed.
Recovery. Retry the command, specifying a milliseconds value in the range 0 through
999.
2212-E
Cause. The AFTER job attribute’s time option specified a microseconds value outside
the allowable range 0 through 999.
Effect. The command failed.
Recovery. Retry the command, specifying a microseconds value in the range 0
through 999.
2213-E
Cause. The command specified an invalid class name.
Effect. The command failed.
Recovery. Retry the command, specifying a valid class name. For information on the
form of a class name, see ADD CLASS Command on page 6-40.
In AFTER time: SECOND must be in the range 0 to 59
In AFTER time: MILLISECS must be in the range 0 to 999
In AFTER time: MICROSECS must be in the range 0 to 999
Invalid class name class-name