NetBatch-Plus Reference Manual

NetBatch-Plus Screens
NetBatch-Plus Reference Manual—522461-002
6-44
Field Descriptions
Field Descriptions
Option
Use the Option field to specify the catalog attachment screen displayed when you
perform the F13–Choose Option function. The field options are:
Set
Use the Set field to enter the name of the defaults set with which the NetBatch-Plus
application associates the DEFINE. The name must identify a defaults set defined on
the Defaults Set Details screen.
DEFINE Name
Use the DEFINE Name field to enter the logical name you want to use as a substitute
for the physical file name. The logical name can contain from 2 through 24 characters.
The first character must be an equals sign (=). The remaining characters can be
letters, numbers, hyphens (-), underscores (_), or circumflexes (^). In some products
(for example, the TACL command interpreter), names whose second character is an
underscore are reserved for use by HP. To avoid errors or unexpected results, do not
use an underscore as the second character. Names beginning with =_ZBAT are
reserved for use by the NetBatch-Plus application.
Owner
Use the three-part Owner field to specify the Guardian owner of the DEFINE record
and the security attributes of that record. For more information on this field, see
Catalog ASSIGNs on page 6-29.
Physical Filename
Use the Physical Filename field to enter the name of the actual file.
The file name must be a Guardian file name. If you enter a partial name, the
NetBatch-Plus application uses the system, volume, and subvolume specified for the
defaults set to expand the name. The Volume field on the Defaults Set Details screen
displays these values.
A[SSIGN] Specifies the Catalog ASSIGNs screen.
P[ARAM] Specifies the Catalog PARAMs screen.
C[ATALOG] Specifies the Catalog Catalog Defaults DEFINEs screen.
D[EFAULTS] Specifies the Catalog Defaults DEFINEs screen.
S[POOL] Specifies the Catalog Spool DEFINEs screen.
T[APE] Specifies the Catalog Tape DEFINEs screen.