NetBatch-Plus Reference Manual

NetBatch-Plus Screens
NetBatch-Plus Reference Manual—522461-002
6-77
Field Descriptions
process-name
is the name of the scheduler process.
When you display the screen, the field shows the name of one of these schedulers:
•
The scheduler from the defaults set associated with the signed-on user. The
NetBatch-Plus application shows the name of this scheduler if you display the
screen when no functions have been performed during the current session.
•
The scheduler that was the subject, directly or indirectly, of the last function
performed during the current session.
The date and time on the system where the scheduler resides appears below your
system’s date at the top of the screen.
Owner
Use the two-part Owner field to enter the Guardian user ID of a super-group user
(255, n). This user ID is a prerequisite to performing all functions except F1–Read and
F3–Status.
In the first part of the field, enter the super-group user ID. Enter the user’s password in
the second part of the field. For more information on entering Guardian user IDs and
passwords, see Password Validation on page 6-182.
You do not have to enter a super-group user ID if it is a prerequisite to performing a
function and either of these conditions exists:
•
A super-group user ID is shown in the field and you entered the password of that
user. The password is not required if the ID was validated during the current
session.
•
A super-group user ID is not shown in the field but at least one has been validated
during the current session. In these circumstances, the NetBatch-Plus application
performs the function using the most recently validated super-group user ID. The
ID used replaces the ID shown in the field.
When you display the screen, the field shows one of these user IDs:
•
The user ID from the defaults set associated with the signed-on user.
NetBatch-Plus shows this ID if no other IDs were validated during the current
session.
•
The user ID of the last user validated by a function performed during the current
session.
Executor Name
Use the Executor Name field to name the executor you want to define, inquire about,
update, or delete.