NetBatch-Plus Reference Manual

NetBatch-Plus Screens
NetBatch-Plus Reference Manual—522461-002
6-176
Functions
If you specified IN in the Use field, you must enter a volume ID. Otherwise, its value is
SCRATCH.
Mountmsg
Use the Mountmsg field to enter an additional message for display with the system
mount message. The message also appears with the drive-usage request printed
when the DEFINE is opened.
Functions
These functions are available on the Job Tape DEFINEs screen:
Function Description
F1–Read Shows information about the DEFINE specified in the DEFINE Name field
that is attached to the current job.
F2–Next Shows information about the next tape DEFINE attached to the job. When
there are no more tape DEFINEs, the function displays the PARAMs for
the job on the Job PARAMs screen.
F4–Add Attaches the DEFINE specified in the DEFINE Name field to the current
job.
F6–Update Updates attributes of the DEFINE specified in the DEFINE Name field.
F7–Read
Catalog
Displays attributes of the catalog DEFINE specified in the Catalog Name
field. The attributes appear in regular text next to or below the attribute
fields. The attributes apply to the job unless you override them in one of
these ways:
•
By entering your preferred attributes in the attribute fields.
•
By entering N, NO, NON, or NONE in the attribute fields. This option
specifies the default value for the fields in which it is entered.
F8–Delete Deletes the DEFINE specified in the DEFINE Name field from the current
job.
F13–Choose
Option
Displays the job attachments screen you specified in the Option field. If
you press F13 when the field is blank, the NetBatch-Plus application
redisplays the Job ASSIGNs screen.
F14–Depend Displays the Job Dependencies screen. Use this screen to specify up to
eight master jobs on which execution of the current job depends. When
you display the screen, it shows the names of any master jobs already
specified for the current job. It also shows the name of the defaults set to
which each master job belongs.
F15–Bulk
Select
Displays the Bulk Job Selection Criteria screen. Use this screen to specify
the criteria the NetBatch-Plus application uses to select the current job for
a bulk submit run. When you display the screen, it shows any selection
criteria already specified for the job.
F16–Previous
Screen*
Displays the previous screen on the menu path.
* Function is available on screen, but not displayed,