NetBatch-Plus Reference Manual

Messages
NetBatch-Plus Reference Manual—522461-002
C-13
Error, Warning, and Informational Messages
The function you attempted failed because you specified the position of a tape file in a
multifile volume for a tape other than an ANSI-standard or IBM-standard labeled tape.
This value is required only for ANSI-standard and IBM-standard labeled tapes.
You attempted to change a supervisory user’s screen and function access privileges.
(An S in the Access Code field on the Screen Security screen indicates a supervisory
user.) The attempt failed because you cannot change the access privileges of such a
user.
The function you selected is not available in the current version of the NetBatch-Plus
application.
The function you attempted failed because you specified a tape file generation group
for a tape other than an ANSI-standard or IBM-standard labeled tape. The generation
group is required only for ANSI-standard and IBM-standard labeled tapes.
You attempted to perform a function on an ANSI-standard or IBM-standard labeled
tape. The attempt failed because the value in the Labels field is BYPASS and you did
not specify the tape device. You must specify the tape device when the value in the
Labels field is BYPASS and the tape is an ANSI-standard or IBM-standard labeled
tape.
The function you attempted failed because you specified the file file-name in the
wrong format. For the correct format, check field help.
The NEWPROCESS procedure returned an illegal home terminal error. For an
explanation of error-number, see the Guardian Procedure Errors and Messages
Manual.
FILESEQ applies to IBM,ANSI tapes
Full Supervisor security is implied when security level is
'S'
Function not as yet implemented
GENeration group applies to IBM,ANSI tapes
Give DEVICE to BYPASS labeled proc
Illegal file name specification file-name
Illegal home term error-number