NetBatch-Plus Reference Manual

Messages
NetBatch-Plus Reference Manual—522461-002
C-24
Error, Warning, and Informational Messages
The F4–Add function created and initialized a new scheduler database. You can now
start the scheduler by using the F10–Start function on the Scheduler Info screen.
You attempted to change scheduler details without first reading the record. Read the
record before retrying the function.
The F10–Start function attempted to start a scheduler already started.
The NetBatch-Plus application did not perform your requested function because the
application was processing another function affecting the same scheduler. The
application usually displays this message when you perform the F4–Add function on
the Scheduler Info screen immediately after performing the F9–Run function.
You attempted a function requiring entry of a scheduler name. The attempt failed
because you did not specify the scheduler.
The function you attempted failed because details of the currently displayed user have
changed since you last read the record. Perform the F1–Read function to display
updated user details.
NetBatch-Plus security denied you access to the function. Use the Password Validation
screen to validate the ID and password of a Guardian user with access to the function.
The function you attempted failed because the integer specifying the selection priority
of a job in its class is not in the valid range 0 through 7.
You attempted to change defaults set details without first reading the record. Read the
record before retrying the function.
Scheduler Added Ok, START now required
Scheduler cannot be altered - please read again
SCHEDULER has already started
Scheduler is busy - Try again later
Scheduler must not be spaces
Security details have changed - re-display
Security violation; You have no authority for this request
SELPRI must be in range 0 to 7
Set cannot be altered - please read again