NetBatch-Plus Reference Manual

Installation, Startup, and Shutdown

NetBatch-Plus Reference Manual—522461-002

2-5

Installation Example

PS0130O. For information on this command, see the File Utility Program (FUP)

Reference Manual.

3. After your super ID licenses the files, you can cold start the NetBatch-Plus

PATHWAY system. For information on cold starting the system, see Configuring

and Starting the NetBatch-Plus Pathway System on page 2-11.

Installation Example

1. Change your current volume and subvolume to the NetBatch-Plus TSV:

$DATA7 ADMIN 34> VOLUME $SYSGEN.ZNBPLUS

$SYSGEN ZNBPLUS 35>

2. Run the NetBatch-Plus INSTALL macro:

$SYSGEN ZNBPLUS 35> INSTALL

INSTALL initializes itself and creates the installation log file INSTLOG in the TSV.

INSTLOG records all installation events.

NetBatch-Plus T9189D48 - (26FEB2002^ABF)

Created $SYSGEN.ZNBPLUS.INSTLOG

Please enter information at the following prompts.

(Press the BREAK key to abort the installation.)

Steps 3 through 6 specify the subvolumes for NetBatch-Plus files and configuration

information for the NetBatch-Plus Pathway system. Configuration information is

written to the PATHCONF file. INSTALL does not process information you enter

until you confirm it in Step 7. You can alter the information at Step 7 if necessary.

3. Enter the user name (group-name.user-name) or number (group-id,user-

id) of the Guardian owner of the NetBatch-Plus Pathway system and the files

INSTALL creates in the database and object file subvolumes:

NBP system owner’s user name or number: 205,70

4. Enter the Guardian name of the subvolume where the INSTALL macro creates

these NetBatch-Plus data files:

•

Data files (NBPnnnn, NBPnnnnx)

•

DDL data dictionary files (DICTxxx)

•

ENFORM compiled query files (ENFORMnn)

•

Help and message text file (NBPIMUDB)

[$VOL.]SUBVOL for database files: $DATA7.NBPDAT

For descriptions of these files, see Appendix A, File Descriptions and Locations.