NetBatch-Plus Reference Manual

Installation, Startup, and Shutdown
NetBatch-Plus Reference Manual—522461-002
2-9
Installation Example
r. Specify whether HIGHPIN is on for the Main server (if so, you can use only
systems running D-series or G-series RVUs to run NetBatch-Plus):
If Main server has HIGHPIN ON, all NETBATCH servers used
by NetBatch-Plus must be D11 or greater.
Main Server HIGHPIN (ON/[OFF])...............: ON
s. Specify whether to use a daily bulk submittal:
Daily Bulk Submit 24-hour Window ([Y]/N) ....: Y
t. Specify the volume and subvolume where TCPLIB resides:
Location of TCPLIB ([$SYSTEM.ZPATHWAY]) .....:
7. Confirm the parameters you entered throughout Step 6.
INSTALL displays all the parameters you entered and prompts you to accept or
modify them:
------ (RETURN) to Continue or (Number) to Modify ------
(RETURN) or (Number) :
•
To accept the parameters as displayed and continue with installation, press
RETURN.
•
To change a parameter before continuing:
a. Enter its line number at the prompt and press RETURN.
The INSTALL macro returns the parameter for you to change.
b. Make the change, then press RETURN.
INSTALL redisplays all parameters for confirmation.
c. Repeat this process until all parameters are correct.
When you press RETURN, the INSTALL macro processes the installation based
on your parameters. INSTALL displays the processing steps. When processing
finishes, INSTALL displays:
NetBatch-Plus has been installed successfully ...
NetBatch-Plus INSTALL completed ...
Closing $volume.NBPDAT.INSTLOG ...
INSTALL then returns you to the TACL prompt.
8. Log on as the super ID (SUPER.SUPER).
9. Change the current volume and subvolume to the object file subvolume containing
the program and server files PB0010O, PB9000O, PS0000O, and PS0130O:
$SYSTEM STARTUP 37> VOLUME $DATA.NBPOBJ
$DATA7 NBPOBJ 38>