NetBatch-Plus Reference Manual

Installation, Startup, and Shutdown
NetBatch-Plus Reference Manual—522461-002
2-17
Running DBUPDATE
Cool Starting the DBUPDATE Pathway Environment
If your DBUPDATE Pathway environment was configured before using the DCOLD
macro, cool start the environment using the cool start macro:
> RUN DCOOL
DCOOL starts the Pathway environment using the previous Pathway control file.
When the macro finishes, it returns you to the TACL prompt. You can now use DRUN
to run DBUPDATE from this subvolume.
Running DBUPDATE
1. From a TACL prompt, run DBUPDATE:
> RUN DRUN
2. Log on using the SUPER.SUPER ID.
DBUPDATE displays the menu screen, which contains three options:
•
Default set details
•
Job definition
•
Attachment sets
Changing Default Set Details or Job Definitions
1. From the menu screen, select either Default set details or Job definition.
DBUPDATE asks you which field to update:
•
Scheduler
•
Executor program
•
Infile
•
Outfile
•
Volume
2. Select the field to update.
•
If you choose to change the scheduler, DBUPDATE asks whether you are
changing only the node or also the scheduler name:
°
To change the node only, you must enter the old and new node names.
°
To change the node and scheduler names, enter the old and new node
names, and the old and new scheduler names.
•
If you choose to change any other field, you must enter the old and new node
names, and the appropriate old and new volume names.