NetBatch-Plus Reference Manual

Changing the NetBatch-Plus Pathway Configuration

NetBatch-Plus Reference Manual—522461-002

3-4

Customizing the Utility Menu Screen

screen. For example, OPTION1 indicates the program is the first program listed on the

screen after BATCHCOM, OPTION5 the fifth program, and so on.

Customization Example

Figure 3-4 gives an example of the PATHCONF changes necessary to substitute a

Pathway application for a program on the Utility Menu screen. In the example, the

Pathway application PS MAIL 6530 replaces the SQLCI option from Figure 3-3 on

page 3-4. The substitution involves specifying both an ASSIGN and a PARAM. The

ASSIGN identifies the application’s PATHMON process. The PARAM specifies the

application’s program object file.

Figure 3-3. Utility Server ASSIGNs for the Standard Utility Menu Screen

SET SERVER PROGRAM $DATA7.NBPOBJ.PS0130O, LINKDEPTH 30

SET SERVER (ASSIGN OPTION1, $SYSTEM.SYSTEM.PERUSE)

SET SERVER (ASSIGN OPTION2, $SYSTEM.SYSTEM.SPOOLCOM)

SET SERVER (ASSIGN OPTION3, $SYSTEM.SYSTEM.PATHCOM)

SET SERVER (ASSIGN OPTION4, $SYSTEM.SYSTEM.FUP)

SET SERVER (ASSIGN OPTION5, $SYSTEM.SYSTEM.EDIT)

SET SERVER (ASSIGN OPTION6, $SYSTEM.SYSTEM.TACL)

SET SERVER (ASSIGN OPTION7, $SYSTEM.SYSTEM.TMFCOM)

SET SERVER (ASSIGN OPTION8, $SYSTEM.SYSTEM.PUP)

SET SERVER (ASSIGN OPTION9, $SYSTEM.SYSTEM.TEDIT)

SET SERVER (ASSIGN OPTION10, $SYSTEM.SYSTEM.BATCHCAL)

SET SERVER (ASSIGN OPTION11, $SYSTEM.SYSTEM.ENFORM)

SET SERVER (ASSIGN OPTION12, $SYSTEM.SYSTEM.SQLCI)

ADD SERVER PS0130

Figure 3-4. Utility Menu Customization Example