NetBatch-Plus Reference Manual

Setting Up the Processing Environment
NetBatch-Plus Reference Manual—522461-002
4-21
7. Define NetBatch-Plus Users
7. Press F4 to create the defaults set.
NetBatch-Plus writes defaults set details to its database file NBP0040.
7. Define NetBatch-Plus Users
NetBatch-Plus user definition involves using the three linked security screens (Security
Supervise, Screen Security, and Utility Security) to define a user’s access privileges to
NetBatch-Plus screens and functions.
1. Display the Security Supervise screen. For information on the fields and functions
on this screen, see Security Supervise
on page 6-215.
2. Enter the name of the user you want to define in the first part of the NBP User field.
Enter the user’s password in the second part of the field.
3. In the Set field, enter the name of the defaults set you want to associate with the
user.
4. Specify, in these fields, the schedulers and classes available to the user on the Job
Definition, Bulk Submit, and Ad Hoc Job Selection screens:
5. Press F4 to define the user at this point. Otherwise, go to Step 6 to continue the
user definition process.
If you press F4, NetBatch-Plus adds the user record to the database using
information from all three screens in the security screen series. (To change details
of a record you add, use the F6 function on any of the three screens.)
Comment At/Af Volume Any User Submit Wait
Out Hold Pri In Restart
Selpri Hold After Pages Startup Stop On Abend
Lines Exec. Prg. Time Drives
Figure 4-11. Defining Default Sets
Job Definitions Bulk Submit Ad Hoc Submit
Defaults
Set Details
F4–Add
NBP0040
(Defaults
Sets)
VST009.vsd