NET/MASTER Management Services (MS) Command Reference Manual

FK
NonStop NET/MASTER MS Commands
2–102 115412 Tandem Computers Incorporated
You can assign concatenated commands to a function key. To do so, you must use
two semicolons (;;), rather than one semicolon, between commands.
When you are defining a prefix function key, you should end the text with a plus
sign (+) if you want a blank when the text is prefixed to the text in the OCS
command input line.
When you are defining a suffix function key, you should start the text with a plus
sign (+) if you want a blank when the text is appended to the text in the OCS
command input line.
If you press an unassigned function key in OCS, NonStop NET/MASTER MS
issues an error message.
For related information, see the ENTER and PF commands.
Examples
1. The following example defines function keys for 6530 and compatible terminals:
CMD "FK F1 ACTION,ZOCHHLPN"
CMD "FK F1 PREF,-START ZOCHHLPN+"
CMD "FK F2 IMM,SPLIT"
CMD "FK F3 IMM,X"
CMD "FK F4 IMM,RETURN"
CMD "FK F5 PREF,-START ZCENFACN+"
CMD "FK F6 IMM,AUTOHOLD"
CMD "FK SF6 ACT,ZDSMPMIN"
CMD "FK F7 IMM,-START ZLOGBRWN"
CMD "FK F8 IMM,CLEAR"
CMD "FK F9 IMM,SWAP"
CMD "FK F10 IMM,CS+"
CMD "FK F11 IMM,CS-"
CMD "FK F12 IMM,ORDER"
CMD "FK F14 ACTION,ZUANPRGN"
CMD "FK F14 PREF,-START ZUANPRGN+"
CMD "FK F15 ACTION,ZOCHHLPN"
CMD "FK F15 PREF,-START ZOCHHLPN+"
CMD "FK F16 IMM,X"
CMD "FK SF16 IMM,RETURN"
2. The following example defines function keys used to recall messages in the recall
buffer:
CMD "FK PAGEUP IMM, PREV"
CMD "FK PAGEDOWN IMM, NEXT"
CMD "FK ROLLUP IMM, ROLLUP"
CMD "FK ROLLDOWN IMM, ROLLDOWN"
CMD "FK SROLLUP IMM, HALFUP"
CMD "FK SROLLDOWN IMM, HALFDOWN"
CMD "FK F13 IMM, RECALLEND"
CMD "FK SPAGEUP IMM, SPREV"
CMD "FK SPAGEDOWN IMM, SNEXT"