NET/MASTER Management Services (MS) Command Reference Manual

FK
NonStop NET/MASTER MS Commands
2–104 115412 Tandem Computers Incorporated
5. The following example displays function key definitions in the roll-delete message
area of an OCS window:
FK
(08:17) --------------------- OPERATOR CONTROL SERVICES ----------------------
FK
NNM1852 KEY TYPE --ASSOCIATED TEXT--
NNM1853 F1 PREF -START ZOCHHLPN+
NNM1853 F1 ACT ZOCHHLPN
NNM1853 F2 IMM SPLIT
NNM1853 F3 IMM X
NNM1853 F4 IMM RETURN
NNM1853 F5 PREF -START ZCENFACN+
NNM1853 F6 IMM AUTOHOLD
NNM1853 F7 IMM -START ZLOGBRWN
NNM1853 F8 IMM CLEAR
NNM1853 F9 IMM SWAP
NNM1853 F10 IMM CS+
NNM1853 F11 IMM CS-
NNM1853 F12 IMM ORDER
NNM1853 F13 IMM RECALLEND
NNM1853 F14 PREF -START ZUANPRGN+
NNM1853 F14 ACT ZUANPRGN
NNM1853 F15 PREF -START ZOCHHLPN+
NNM1853 F15 ACT ZOCHHLPN
NNM1853 F16 IMM X
AUTO HOLD ------------------ NonStop NET/MASTER D30 ---------------- --------
M=>
6. The following example defines a prefix function key, following the text with a plus
sign (+):
FK SF5 PREF,MSG ALL+
Assume that you type the following text in the OCS command input line:
SHUTDOWN in 10 minutes. Please log off now.
When you press the SF5 function key, NonStop NET/MASTER MS displays the
message in the roll-delete message area as the following message lines show:
MSG ALL SHUTDOWN in 10 minutes. Please log off now.
09:19:58 NNM0270 MSG AT 09:19 FROM NMTJN: SHUTDOWN in 10 minutes. Please log
off now.
NNM0269 MESSAGE SENT TO ALL OCS OPERATORS