NET/MASTER Management Services (MS) Command Reference Manual

ISR
NonStop NET/MASTER MS Commands
115412 Tandem Computers Incorporated 2–125
{ EMS | PPO }
specifies EMS event messages only. PPO is a synonym for EMS.
RESET
resets the attributes of all flow classes of the links specified by the link class to
their default values. You cannot specify a particular flow class using this operand.
It resets all flow classes. If you omit the link class specification, all the flow classes
of all links are reset.
The SOLICIT and UNSOLICIT operands are invalid with this operand.
link-class
specifies the link(s) on which to: enable, disable, alter, or reset the flow class(es);
allow or disallow solicited event message flows; or allow or disallow unsolicited
event message flows.
If you omit the link class specification, all link classes are affected.
ALL
modifies all current and future links, including the default ISR definition and
all specific ISR definitions.
DEFAULT
modifies the default ISR definition and all active links using the default
definition.
INACTIVE
removes all specific ISR definitions for links that are currently inactive. This
resets the links to the default values. This keyword is valid only with the
RESET operand.
LINK= link-name
modifies the specified link. The link name is defined in the LINK DEFINE
command. The link name can be from 1 through 12 characters long and can
include any displayable characters. Alphabetic characters are not
case-sensitive.
SOLICIT
specifies whether to allow or disallow solicited event message flow.
YES
allows solicited event message flow. This allows your system to send solicited
ISR event messages to a remote system and allows your system to receive ISR
event messages from a remote system.