NET/MASTER Management Services (MS) Command Reference Manual

Contents
xviii 115412 Tandem Computers Incorporated
Table 1-8. Inter-System Routing (ISR) Commands 1-23
Table 1-9. Commands Used to Execute NCL Procedures 1-23
Table 1-10. Commands Used to Control NCL Processes 1-23
Table 1-11. Commands Used to Display NCL Information 1-23
Table 1-12. Commands Used With Function Keys 1-23
Table 1-13. Commands Used With Time 1-24
Table 1-14. Commands Used With Other Commands 1-24
Table 1-15. Commands Used With Terminals 1-24
Table 1-16. Commands Used With Configuration 1-24
Table 1-17. Commands Used With Guardian Utilities and External
Programs 1-24
Table 1-18. Commands Used With Messages 1-25
Table 1-19. Commands Used With Files and UDBs 1-25
Table 1-20. Trace Commands 1-25
Table 1-21 Commands Used With Pathway Server Classes 1-25
Table 2-1. AT Command Example Time Formats 2-13
Table 2-2. EVERY Command Example Time Formats 2-92
Table 2-3. DSNM Utility Commands Default Authority Levels 2-177
Table 2-4. DSNM Subsystem Commands Default Authority Levels 2-177
Table 2-5. PARAM Operands That Configure a Single Value 2-188
Table 2-6. PARAM Operands That Add Information to a List 2-188
Table 2-7. PARAM Operands That Define Logical Names and Process
Types 2-188
Table 2-8. PARAM Operands That Define Process Attributes 2-189
Table 2-9. Using PARAM Operands That Define Logical Names and
Process Types 2-190
Table 2-10. Using PARAM Operands That Define Process Attributes 2-191
Table 2-11. PARAM Operands 2-192
Table 2-12. PROFILE Operands 2-269
Table 2-13. PROFILE Operands Restrictions 2-270
Table 2-14. PARAM Operands Displayed by SHOW PARAM
Command 2-369
Table 2-15. PARAM Operands Displayed by SHOW PROCESS
Command 2-380