NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
NRDRET
NonStop NET/MASTER MS Commands
2–168 115412 Tandem Computers Incorporated
NRDRET The NRDRET command restores all full non-roll-delete (NRD) messages associated
with an OCS window. If you have temporarily removed full NRD messages from the
NRD message display area of an OCS window, using NRD cursor deletion, you can
use this command to redisplay them. When you enter OCS, you must explicitly
execute the NRDRET command to display all NRD messages currently in the NRD
message queue that you are entitled to receive.
NRDRET
Note This command applies only to full NRD messages. It does not apply to NRD messages with the OPER
attribute. A full NRD message, in contrast to a NRD message with the OPER attribute, is a NRD
message, held in the NRD message queue, that has a delete operator message (DOM) ID.
Considerations
The default authority level of this command is 0.
You can enter this command from any NCL procedure, including the INIT NCL
procedure, by using the CMD core statement (but not the INTCMD verb).
A NRD message is associated with an OCS window if it has been delivered to the
window, or if it would have been delivered to the window had the user of the
window been logged on when it was sent.
This command does not display NRD messages from the NRD message central
queue that you are not entitled to receive.
You can specify the minimum size to which the roll-delete message display area
can contract by using the PROFILE RDMIN command: this, in turn, determines
the maximum size of the NRD message display area.
For related information, see the PROFILE RDMIN, PURGE NRD, and SHOW NRD
commands.
Example
The following example restores all full non-roll-delete (NRD) messages associated
with an OCS window:
NRDRET