NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
OPSYS
NonStop NET/MASTER MS Commands
2–178 115412 Tandem Computers Incorporated
You can use the ROUTE link-name OPSYS command to send a DSNM command
to a remote Tandem system running NonStop NET/MASTER MS or a VTAM
command to a remote IBM system running the SOLVE management services.
Refer to the NonStop NET/MASTER MS System Management Guide for more
information on using the INIT NCL procedure to install, configure, and remove
Format 1 of the OPSYS command.
For related information, see the PARAM SWGUID, PARAM UACAUTH, PARAM
UACUTIL, PARAM UADAUTH, PARAM UADUTIL, PROGRUN, and
SYSPARMS SWGUIDDSNM commands.
Examples
1. Using Format 1 of the OPSYS command, the following example establishes a new
session with the PERUSE utility and obtains information about your spooler jobs.
The following screen displays the results.
OPSYS SEND PERUSE JOB
(14:02) --------------------- OPERATOR CONTROL SERVICES ----------------------
START OPSYS SEND PERUSE JOB
NNM1456
NNM1456 JOB BATCH STATE PAGES COPIES PRI HOLD LOCATION REPORT
NNM1456 897 READY 2 1 4 #ABC USER
JOHNN
NNM1456 898 READY 2 1 4 #ABC USER
JOHNN
NNM1456 899 READY 2 1 4 #ABC USER
JOHNN
NNM1456 900 READY 2 1 4 #XYZ USER
JOHNN
NNM1456 901 READY 2 1 4 #XYZ USER
JOHNN
NNM1456 902 READY 2 1 4 #ABC USER
JOHNN
NNM0999 *END*
_____________________________________________________________________________
---------- ------------------ NonStop NET/MASTER D30 ---------------- --------
M=>