NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
OPSYS
NonStop NET/MASTER MS Commands
115412 Tandem Computers Incorporated 2–181
9. Using Format 2 of the OPSYS command, the following example returns a single
line of status information for the line $LHORL and lists the acceptable states for
the line:
OPSYS INQUIRE $LHORL, DETAIL
10. Using Format 2 of the OPSYS command, the following example starts all members
of the group ALL-EXPAND that are either pending or in the DOWN state:
OPSYS START ALL-EXPAND, NOT-UP
11. Using Format 2 of the OPSYS command, the following example displays the
operational statistics for the line $X2501:
OPSYS STATISTICS $X2501
12. Using Format 2 of the OPSYS command, the following example displays one line
of status information for each member of the group ALL-EXPAND that is in the
DOWN state:
OPSYS STATUS ALL-EXPAND, DOWN
13. Using Format 2 of the OPSYS command, the following example stops the physical
units and logical units subordinate to the lines in the group ORL-SNAX. It does
not stop the lines themselves.
OPSYS STOP ORL-SNAX, SUBONLY